Craftisian Blogs

Recently I restored a vintage 6" mortise gauge by I. Sorby. [qzr1l3z.jpg] I mentioned that I had to replace the spurs (points) on it and was asked...

For the shapes of the climbing modules, I took inspiration from the simple circle-triangle-square shapes that were repeated throughout the 2021 Net...

Down to where I can see the bottom of the depth limit holes so I marked each one with a pencil. [17268FC9-78C5-42FF-BA75-F7B66E8F91E2.jpeg] After m...

Our museum received a Gledhill-Brook time recorder as a donation. It has fallen to me to bring it back from the dead. This where it stands right n...

[rm450-65-hdwallpaper.jpg] Image by rawpixel.com on Freepik

Before I started another mess, I marked out some strategic lines for checking the shape. Also, I cut off the neck at the 12th fret position. This i...

Hello again! Upon having all the drawers completed apart from the fronts it was time to decide on a design I toyed with the idea of having beaded e...

I'm still working on ideas for the climbing components, but since this is a Christmas present for my wife and daughter, I need to have something to...

With the sanding out of the way and the threaded couplers epoxied into the feet, the only thing left for the upright components was to apply some f...

Your projects are now presented on the Craftisian in all their glory. Gone are the square-cropped thumbnails that didn't present majority of the pr...

 Worked on the radiator and front fenders. [Image] [Image] Added a smaller bearing to my flush cuter bit. Adds just enough lip to get er done. [...

 I keep giving away my hot rods so lets try it one more time. I hid the big motor on the last one so thought I would leave the hood off this time t...