Search

This recall might affect a considerable number of us woodworkers. Recall Date: July 2, 2014 Recall Number: 14-221 Porter-Cable Fixed-Base Productio...

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are no...

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are no...

Well, I said I would post again when the veneering was done. It took a little longer than I expected because I decided to add a little marquetry to...

Due to the base construction, there is now a pair of enclosed compartments in the base which I wanted to be able to access.  There were two ways th...

 [02.07 Design - Cart Details.jpg] With the washers sorted, I started on the cart’s base. The base is a panel with a skirt, an upside-down, open b...

This is probably the most involved piece in the project (yes, even more than the doors). If you refer back to the first part in this blog you will ...

Need to test the run-out on a drill press? Grab your Starrett 657AA and a dial indicator. This magnetic base holds strong to the table of your dril...

Continuing to work on the second urn.  I glued up the sides and top.  [20250324_135753.jpg] I used ½ pieces of the space balls (nice fit!) on the ...

After discussing the base with my "client" (my husband), I'm going with a combination of maple with the walnut I had left from the project.  This w...

I did a review of this gadget a while back.  Since then, I have used it for a number of projects and like it even more.  Here is the link to my e...