Woodworking Blogs

First of many coats, this fit really take a few to get it where I want it with the ebony stain. 1st coat 2nd coat Oh and the Chardonnay panels are ...

Not a huge update but finally got the top on and all the sanding done. As well as cut and rounded over the port, mounted the crossover, ran wonder ...

I seem to have a knack for doing things backward. This time I cut the hinge mortises on the door upside down, meaning I thought the top was the bot...

I’ve been WW-ing almost 4- years and my first project was building infeed/outfeed ramps for my lunchbox planer. I built it on a 1/2 sheet of 3/4 pl...

I started building a chevalet. I want to thank Paul (aka shipwright) and Mike for their help. Downloaded the Sketch up drawing made by Paul. Below ...

I started building a chevalet. I want to thank Paul (aka shipwright) and Mike for their help. Downloaded the Sketch up drawing made by Paul. Below ...

Number 8 of 12 is done. Painted and installed. This one is 18" and goes to the attic. Picked up the lumber for 9 and 10 last night after trick or t...

It was a crazy busy summer, no time to work on the shop much less create anything it. Made this storage unit using scrap & pallet wood . Each s...

Our 7th WoodworkingWeb awards are over and we ended up with 5 entries. I would like to thank you all who participated by submitting entries or voti...

Think back… way back… What was the FIRST thing that you learned about woodworking, as you worked on your first creation?

Finally got around to wrapping the front face onto the base and flush trimming the top panel. The top is just set in place right now as it need som...

We have a few pine cones to deal with throughout the year. If I get to them right after they fall, the shop vac makes short work of them. However, ...