Craftisian Blogs

While working on the Altai Project Logo carving, I discovered I needed a narrow skew in order to get down into some of the corners. I have a handfu...

Found this for $9. You better believe I scoured the place top-to-bottom looking for the Kapex. Nowhere to be found. This is the first Festool thin...

Also, not a typo. Red Zebrawood. Just came in. [IMG_7391.jpeg][IMG_7390.jpeg] No, I don’t work there. I just go in a lot. This is interesting but...

I use a more error proof method to tile the forms in the CNC. There are 2 reference holes in a temporary spoil board. Two matching holes are cut in...

  This is a tutorial on making a simple jig for cutting wine corks in half, along their length. The jig requires only simple scraps to build and is...

Found today for $20 I did not yet have this size, and I have a son that I would love to teach how to use this. [IMG_7603.jpeg][IMG_7604.jpeg][IMG_...

It’s clear in retrospect looking at the initial photos of it in the salvage yard, taken moments after arrival that it was always missing one of the...

- - - -

  Lazyman suggested I should verify my form shapes by checking an inverse of the forms against the car profile. This gave me a chance to try out th...

Acquired from Urban Ore: https://craftisian.com/entries/2230-wooden-tool-box I threw some Daddy Van’s on this box and it NEEDED it. It was a pain ...

Some of my favorite things to restore are hard to find files and rasps. Sometimes it is very rewarding and only rarely is it disappointing. Occasi...

Before (paid $8.95 at salvage): [IMG_2908.jpeg][IMG_2909.jpeg][IMG_2910.jpeg][IMG_2911.jpeg][IMG_2912.jpeg][IMG_2915.jpeg] After sanding to 80, th...