Woodworking Blogs

What a horrible picture! I’m sure that’s the first thought as you start this blog. I’m sure it was followed by things like: did he use a flip phone...

I have had my HFDC for several years now, originally stock, then with the Wynn 35A canister, and finally with a couple of home made cyclone type mo...

I know that I have said that there is no “fancy joinery” in this bench and there certainly doesn’t have to be. There is however, in my own bench, a...

I’ve added dust collectors to my shop both because it’s necessary for some equipment, like my planer and jointer to operate and because I wanted to...

NOTE: Most of this page can be avoided if you want to just drill your dog holes in the layered plywood. The inserts are the “Cadillac version”. Par...

In this video I share how I cut small parts on the miter saw. I am sure this one will be cause for active commentary from the safety police and may...

When it comes to sharing woodworking with my grandkids, I keep it simple. In fact, I really don’t care if they take a shine to woodworking, I would...

My work bench is a work in progress. Making it from two 5 foot pieces of laminated tops. One section is on wheels so I can use it as an L shaped or...

I have installed the dust collector hose to both saws, installed electrical outlet to the vacuum & both saws which are switched at the miter sa...

OK Trendsetters here is my workbench, as I do not have a workshop as such I work in the drive way of my home and my “Trusty” Workbench sits in the ...

I used mostly pallet wood, the back, floor & drawer bottoms are made from 1/4 " paneling from partition walls that I removed from the shop, als...

OK, lets get started. I will go through the build process in the same order that I built the bench and as a non-working concept of wedge power woul...