Craftisian Blogs

At the top of the lower house of this windmill there is a round flat part where the top of the windmill rests on and that makes it able to smoothly...

Having finished the "onder tafelment" and the "boven tafelment", now I will make the posts, and because the shape of the underside of this windmill...

This part of the mill is called "koker" and can be translated as tube. It is part of the bottom part of the windmill and allows the main drive shaf...

In the previous blog a made the "onder tafelment", now I am going to make the "boven tafelment" (onder is under and boven is upper). It is located ...

Boys and Girls,   In the previous video, I got lost in how to cut on my MFT layout on a short board.  It was and embarrassing long delay, portrayin...

Before, [IMG_8259.png] after, [IMG_8260.png] Boys and Girls, I always hated blogs with a single line that contained bugger all detail but a link ...

There have been record-breaking 314 projects posted in December. Congrats to Bentlyj for winning the One-Plank Woodworking Projects by Andy Standin...

and I don't mean that in the pleasurable way. Boys and Girls,  Just did this today... with still my dodgy leftie (arm)... so here you are. If y...

I decided to tackle the twisted stem section in parallel with the padlock and I kind of jumped between the two as I progressed. First off, I drill...

“This blog was originally posted on another woodworking forum back in 2015. The fact that I finished this project a long time ago means you won't h...

Boys and Girls, After finding an appropriately wide panel (past constructions), the first step was to cut to length. My Kapex has a reach of only ...

 Now it is time to carve the bowl of the spoon. Since the top surface of the spoon bowl needs to be lowered somewhat and I will lose my drawing of ...