Kelly has inspired me!!! (See her blog, here) So here’s the challenge: 1. create a little treasure, whether it is something carved, turned, or glue...

Number 8 of 12 is done. Painted and installed. This one is 18" and goes to the attic. Picked up the lumber for 9 and 10 last night after trick or t...

I seem to have a knack for doing things backward. This time I cut the hinge mortises on the door upside down, meaning I thought the top was the bot...

I’m very happy to report that all 10 of my doors, which have all gone through at least one complete heating and cooling season, have not moved at a...

In the process of making a jig, I routed a dado for T-track in recycled plywood. Since my trim router was already set up with a ¾” straight bit, I ...

This time we have teamed up with Lee Valley Tools. Theme: Bookmatching See the grain, slice the grain, re-glue the grain, creating a mirror-image (...

Our 10th WoodworkingWeb Awards are over and we finished with 11 entries. I would like to thank you all who participated by submitting entries or vo...

After I got my new Exterior door for the lid of the bench I needed to enable some hold-downs. Since the top is made from particle board 1.75" thick...

I am left handed so I had to install the vice at the wrong end of the table, because I had no lights in the garage. Since then I have install light...

The other day I was asked by my wife to take some stuff to her church sale. i did as asked. When I got there somebody had left this thing at the do...

Hi WWWeb People! Well, I have totally run out of room with my little 12’ X 8’ woodworking shed, and decided earlier this year, if I’m to be in the ...

Hi people ! I’m so glad to say that I’m up and running, I had a major detour last September. I got sick with I thought was the flu, but in 3 days I...

Theme: Dovetali Joint Living on the edge, with dovetail joints. It’s time to get edgy and showcase your dovetail joinery. Whether the creation is b...

Our 9th WoodworkingWeb Awards are over and we finished with 7 entries. I would like to thank you all who participated by submitting entries or voti...

In a previous post I showed some logs that were given to me. https://woodworkingweb.com/creations/2765-free-bois-d-arc-osage-orange. I finally got ...

My drum sander’s conveyor recently quit. We were able (with help) to narrow down the problem to a component on the speed control. My husband said h...

I can’t express how thankful I am for all the help in getting my sander’s conveyor running again. Living in the middle of nowhere, I was unable to ...

Here is the start of my bench journey It started with a bunch of 2″×10 " SPF ( spruce/pine/fir ) floor joist which where fairly dry and a good grad...